The Cannabis Facility PPE Kit, Room by Room
A working PPE kit for a cannabis cultivation facility is five items: nitrile gloves, a body garment sized to the room (coverall for cultivation and sanitation, lab coat for trim and packaging), hair nets, beard covers for staff who need them, and shoe covers at room changeover points. That covers the contamination-control job. It does not cover specific hazards like pesticide application, which needs PPE rated for the chemical.
PPE is the only consumable category that scales with headcount and shifts rather than plant count, which is why it is the most frequently under-ordered line in a facility. Build the kit by room, then multiply by people and days.
The five-item kit
1. Nitrile gloves
5 mil, textured fingertips, extended cuff over 240 mm, non-sterile. Latex-free removes allergy questions across the workforce. HBX Heavy Duty Nitrile Gloves in S through XL, 100 per box and 1,000 per case. Details in best nitrile gloves for cultivation.
2. Body garment
Three options, chosen by room rather than by preference:
- 55 GSM coverall with attached hood and integrated boot covers for full enclosure.
- 45 GSM coverall, no boot covers for everyday grow room work.
- 3-pocket lab coat or no-pocket lab coat for trim, processing and packaging.
See best disposable coveralls for grow rooms for the full garment comparison, and 45 vs 55 GSM coveralls for the coverage decision.
3. Hair nets
Breathable nonwoven mesh, lightweight enough to wear through a full shift. HBX Disposable Hair Nets come in 21 inch and 24 inch to fit different head sizes and coverage needs, 2,000 per case. Stocking both sizes is worth it: a net that does not fit gets adjusted all shift or taken off.
4. Beard covers
Hair nets do not cover facial hair, which is why this is a separate item rather than an optional one. HBX Disposable Beard Covers are lightweight nonwoven with elastic edges, one size fits most, sold in bulk cases, and they layer with hair nets, masks and coveralls.
5. Shoe covers
Pull over standard footwear including work boots, with a textured sole. HBX Disposable Shoe Covers are one size fits most, 100 per pack. Use them at entry points to flower rooms, propagation areas and processing or packaging zones.
Kit by room
| Room | Gloves | Body garment | Head | Feet |
|---|---|---|---|---|
| Propagation | 5 mil nitrile | 45 GSM coverall or lab coat | Hair net, beard cover | Shoe covers at entry |
| Veg and flower | 5 mil nitrile | 45 GSM coverall | Hair net, beard cover | Shoe covers at entry |
| Harvest and trim | 5 mil nitrile | Lab coat, 3-pocket | Hair net, beard cover | Shoe covers at entry |
| Packaging | 5 mil nitrile | Lab coat, no pocket | Hair net, beard cover | Shoe covers at entry |
| Sanitation and maintenance | 5 mil nitrile | 55 GSM coverall with boot covers | Hair net, beard cover | Covered by garment |
This is a starting template, not a compliance document. Your own SOP and your state's rules govern what is actually required where.
Sizing the order
Four inputs: techs per shift, shifts per day, days in the cycle, and entries per shift for the shoe cover line. Everything else follows.
For one room with four techs on one shift over a 63-day cycle, at six glove changes and three room entries per shift:
| Item | Per cycle | Pack size | Order |
|---|---|---|---|
| Nitrile gloves | 3,024 | 1,000 per case | 3 cases |
| Coveralls | 252 | 50 per carton | 5 cartons |
| Hair nets | 252 | 2,000 per case | 0.13 case |
| Beard covers | Varies with staff | Bulk case | Under 1 case |
| Shoe covers | 1,512 | 100 per pack | 16 packs |
Note the shape of that table. Gloves, coveralls and shoe covers are recurring orders; hair nets and beard covers are a case that lasts most of a year for a room this size. Full model in what a flower room consumes per cycle.
The three mistakes that cost the most
- Budgeting PPE from plant count. It consumes per person per shift. This single error is behind most emergency PPE orders.
- Stocking one size. Gloves in one size and hair nets in one length both end the same way: staff remove them. Unworn PPE is not PPE.
- Treating a disposable garment as a chemical suit. Microporous coveralls are barriers against dust, debris and light splash. Chemical tasks need rated PPE. See PPE requirements.
Browse the full line at HBX personal protective equipment, or contact us about commercial supply for facility programs.
Frequently asked questions
What PPE does a cannabis grow facility need?
For contamination control: nitrile gloves, a coverall or lab coat matched to the room, hair nets, beard covers for staff with facial hair, and shoe covers at room entry points. Task-specific hazards, particularly pesticide application, require PPE rated for the hazard on top of this.
Do I need beard covers if I already have hair nets?
If staff have facial hair, yes. Hair nets do not cover it, which is why beard covers are a separate item. They layer with hair nets, masks and coveralls.
What size hair nets should I stock?
Both 21 inch and 24 inch. Head sizes and coverage needs vary, and a net that does not fit gets adjusted constantly or removed.
Where should shoe covers be used?
At room entry points, typically flower rooms, propagation areas and processing or packaging zones. Many facilities set up a changeover point at each door as part of the room SOP.
How often should PPE be changed?
That is your SOP's call, not a product spec. What matters for ordering is that whatever frequency you set drives consumption directly: at four techs and six glove changes a shift, one room burns three cases of gloves per cycle.