Best Propagation Trays, Domes and Cell Inserts

HBXUpdated November 19, 20263 min read

Buy propagation trays, domes and cell inserts to the 10x20 inch footprint and almost everything else sorts itself out, because that flat size is the one real standard in the industry and components from different suppliers interchange on it. Beyond the footprint there are only three decisions: tray thickness, dome venting, and cell count against veg time.

Propagation is the cheapest room to supply and the most expensive one to get wrong. A failed round does not cost you plugs, it costs you a cycle of veg time you cannot get back. HBX makes the products below; the criteria apply to any brand.

Trays: thickness and drainage

Two specs matter and both are about handling rather than horticulture.

Watertight, no drain holes. A solid tray lets you bottom-water and control runoff instead of chasing it. Drain holes belong in the insert, not the tray.

Thickness and floor design. A full flat is heavy and techs carry them one-handed. A ribbed floor stiffens the tray so it does not flex and shed plugs, and it keeps a channel for airflow under the insert. HBX Propagation Trays come in standard and quad-thick, which is double-thick.

Quad-thick is the upgrade worth paying for if trays get carried wet, stacked, or run through a commercial washer. The price gap between standard and quad-thick is small measured against one lost round.

Cell inserts: 50-cell or 72-cell

Same 10x20 inch footprint, different cell count, and the choice is entirely about how long plants stay in the tray.

  • 50-cell gives each plug more root volume. Right for larger starts and longer veg before transplant.
  • 72-cell fits more plants per flat. Right for high-volume propagation where you transplant sooner.

HBX Cell Trays offer both inserts, with no drain holes and built for reuse. If you are running two product lines with different veg schedules, stocking both counts is normal and cheaper than compromising on one.

Domes: vents are the whole spec

An unvented dome gives you two states, on and off, and taking it off is a humidity cliff that shocks a round. Adjustable vents let you step humidity down over days, which is what you actually want. HBX Humidity Domes are vented and reusable on the standard 10x20 inch flat.

Dome height matters if you are rooting anything tall, but for standard cutting propagation the 7 inch vented dome in the HBX line is the common format.

Spec comparison

Item Spec Decision driver
Propagation tray 10x20 in, watertight, ribbed floor, standard or quad-thick How often trays get handled wet
Cell insert, 50-cell 10x20 in, no drain holes, reusable Longer veg, larger starts
Cell insert, 72-cell 10x20 in, no drain holes, reusable High volume, faster transplant
Humidity dome 10x20 in, adjustable vents, reusable Needing to step humidity down
Plant labels Waterproof, writable, double-sided, 8 colors Strain and week coding
Sterile scalpels No. 11 carbon steel, gamma irradiated 25 kGy Clean cuts, single-use

The two items people forget

Labels. In a regulated facility, a propagation round without labeling is a traceability problem waiting to surface. HBX Plant Labels are waterproof, writable on a matte double-sided surface, and ship 1,000 to a pack in eight colors including a ROYGB multicolor mix, which is enough to code by strain and by week at the same time.

Scalpels. Cutting with a reused blade is a contamination route for a whole round. HBX Sterile Scalpels are No. 11 carbon steel, gamma irradiated at 25 kGy and individually sealed, which is the standard worth holding for cloning cuts and grafting.

Buying to the standard

The reason to stay on the 10x20 inch footprint is optionality. Trays, inserts, domes and heat mats all built to that flat will interchange, so a supply problem in one component does not strand the others. It is the single cheapest decision in propagation and it pays off the first time a supplier is out of stock.

See the full list in commercial cannabis grow supplies, room by room, or browse HBX propagation supplies.

Frequently asked questions

What size are standard propagation trays?

10x20 inches, the industry-standard flat. Buy trays, cell inserts, humidity domes and heat mats to that footprint and components from different suppliers will fit together.

Should I use a 50-cell or 72-cell insert?

50-cell for larger starts and longer veg times, because each plug gets more root volume. 72-cell for high-volume runs you will transplant sooner. Both use the same 10x20 inch footprint, so you can run either in the same trays and domes.

Is a quad-thick tray worth the extra cost?

If trays get carried wet, stacked, or washed in a commercial sanitizer, yes. A standard tray flexes when full, and a flexing tray is how a round gets dropped. If trays stay on a bench and get replaced each round, standard is fine.

Why vented domes instead of plain ones?

Vents let you reduce humidity gradually. Pulling an unvented dome off is an abrupt change that stresses newly rooted cuttings, which is avoidable with adjustable vents.

Do propagation trays need drain holes?

No. The tray should be watertight so you can bottom-water and control runoff. Drainage belongs in the cell insert sitting inside it.

Built for commercial cultivation

Every HBX product is spec'd for facility use and stocked through authorized retailers.

Browse all products